Return to viewcvs.conf CVS log

Up to [RizwankCVS] / geekymedia_web / viewcvs

Imported source/web tree

#---------------------------------------------------------------------------
#
# Configuration file for ViewCVS
#
# Information on ViewCVS is located at the following web site:
#     http://viewcvs.sourceforge.net/
#
#---------------------------------------------------------------------------

#
# BASIC CONFIGURATION
#
# For correct operation, you will probably need to change the following
# configuration variables:
#
#    cvs_roots
#    default_root
#    rcs_path
#    mime_types_file
#
# It is usually desirable to change the following variables:
#
#    address
#    main_title
#    forbidden
#
#    use_enscript
#    use_cvsgraph
#
# For Python source colorization:
#
#    py2html_path
#
# If your icons are in a special location:
#
#    icons
#
# Also, review the .ezt templates in the templates/ directory to adjust them
# for your particular site.
#

#
# FORMAT INFORMATION
#
# This file is delineated by sections, specified in [brackets]. Within each
# section, are a number of configuration settings. These settings take the
# form of: name = value. Values may be continued on the following line by
# indenting the continued line.
#
# WARNING: indentation *always* means continuation. name=value lines should
#          always start in column zero.
#
# Comments should always start in column zero, and are identified with "#".
#
# Certain configuration settings may have multiple values. These should be
# separated by a comma. The settings where this is allowed are noted below.
#
# Any other setting that requires special syntax is noted at that setting.
# 

#---------------------------------------------------------------------------
[general]

#
# This setting specifies each of the CVS roots on your system and assigns
# names to them. Each root should be given by a "name: path" value. Multiple
# roots should be separated by commas.
#
cvs_roots =
	RizwankCVS : /home/rizwank/cvs

# this is the name of the default CVS root.
default_root = RizwankCVS

# uncomment if the RCS binaries are not on the standard path
#rcs_path = /usr/bin/

#
# This is a pathname to a MIME types file to help viewcvs to guess the
# correct MIME type on checkout.
#
# If you are having problems with the default guess on the MIME type, then
# uncomment this option and point it at a MIME type file.
#
# For example, you can use the mime.types from apache here:
#mime_types_file = /usr/local/apache/conf/mime.types

# This address is shown in the footer of the generated pages. 
# It must be replaced with the address of the local CVS maintainer.
address = <a href="mailto:rizwanNOSPAMk@geekymedia.como">Rizwan Kassim</a>

# this title is used on the main entry page
main_title = CVS Repository

#
# This should contain a list of modules in the repository that should not be
# displayed (by default or by explicit path specification).
#
# This configuration can be a simple list of modules, or it can get quite
# complex:
#
#   *) The "!" can be used before a module to explicitly state that it
#      is NOT forbidden. Whenever this form is seen, then all modules will
#      be forbidden unless one of the "!" modules match.
#
#   *) Shell-style "glob" expressions may be used. "*" will match any
#      sequence of zero or more characters, "?" will match any single
#      character, "[seq]" will match any character in seq, and "[!seq]"
#      will match any character not in seq.
#
#   *) Tests are performed in sequence. The first match will terminate the
#      testing. This allows for more complex allow/deny patterns.
#
# Tests are case-sensitive.
#
forbidden =

# Some examples:
#
# Disallow "example" but allow all others:
#   forbidden = example
#
# Disallow "example1" and "example2" but allow all others:
#   forbidden = example1, example2
#
# Allow *only* "example1" and "example2":
#   forbidden = !example1, !example2
#
# Forbid modules starting with "x":
#   forbidden = x*
#
# Allow modules starting with "x" but no others:
#   forbidden = !x*
#
# Allow "xml", forbid other modules starting with "x", and allow the rest:
#   forbidden = !xml, x*, !*
#

#
# This option provides a mechanism for custom key/value pairs to be
# available to templates. These are stored in key/value files (KV files).
#
# Pathnames to the KV files are listed here, specified as absolute paths
# or relative to this configuration file. The kV files follow the same
# format as this configuration file. It may have multiple, user-defined
# sections, and user-defined options in those sections. These are all
# placed into a structure available to the templates as:
#
#    kv.SECTION.OPTION
#
# Note that an option name can be dotted. For example:
#
#    [my_images]
#    logos.small = /images/small-logo.png
#    logos.big = /images/big-logo.png
#
# Templates can use these with a directive like: [kv.my_images.logos.small]
#
# Note that sections across multiple files will be merged. If two files
# have a [my_images] section, then the options will be merged together.
# If two files have the same option name in a section, then one will
# overwrite the other (it is unspecified regarding which "wins").
#
# To further categorize the KV files, and how the values are provided to
# the templates, a KV file name may be annotated with an additional level
# of dotted naming. For example:
#
#    kv_files = [asf]kv/images.conf
#
# Assuming the same section as above, the template would refer to an image
# using [kv.asf.my_images.logos.small]
#
# Lastly, it is possible to use %lang% in the filenames to specify a
# substitution of the selected language-tag.
#
kv_files =

# example:
# kv_files = kv/file1.conf, kv/file2.conf, [i18n]kv/%lang%_data.conf
#

#
# The languages available to ViewCVS. There are several i18n mechanisms
# available:
#
#   1) using key/value extension system and reading KV files based on
#      the selected language
#   2) GNU gettext to substitute text in the templates
#   3) using different templates, based on the selected language
#
# ### NOTE: at the moment, the GNU gettext style is not implemented
#
# This option is a comma-separated list of language-tag values. The first
# language-tag listed is the default language, and will be used if an
# Accept-Language header is not present in the request, or none of the
# user's requested languages are available. If there are ties on the
# selection of a language, then the first to appear in the list is chosen.
#
languages = en-us

# other examples:
#
# languages = en-us, de
# languages = en-us, en-gb, de
# languages = de, fr, en-us
#

#---------------------------------------------------------------------------
[templates]

#
# The templates are specified relative to the configuration file. Absolute
# paths may be used, if you want to keep these elsewhere.
#
# If %lang% occurs in the pathname, then the selected language will be
# substituted.
#
# Note: the selected language is defined by the "languages" item in the
#       [general] section, and based on the request's Accept-Language
#       header.
#

query = templates/query.ezt
footer = templates/footer.ezt
diff = templates/diff.ezt
graph = templates/graph.ezt
annotate = templates/annotate.ezt
markup = templates/markup.ezt

directory = templates/directory.ezt
# For an alternate form, where the first column displays a revision number
# and brings you to the log view (and the filename displays the HEAD), then
# you may use this template:
# directory = templates/dir_alternate.ezt

log = templates/log.ezt
# For a log view where the revisions are displayed in a table, you may
# want to try this template:
# log = templates/log_table.ezt

#---------------------------------------------------------------------------
[cvsdb]

#host = localhost
#database_name = ViewCVS
#user = 
#passwd = 
#readonly_user = 
#readonly_passwd = 
#row_limit = 1000

#---------------------------------------------------------------------------
[options]
### DOC

# sort_by: File sort order
#   file   Sort by filename
#   rev    Sort by revision number
#   date   Sort by commit date
#   author Sort by author
#   log    Sort by log message
sort_by = file

# hide_attic: Hide or show the contents of the Attic subdirectory
#   1      Hide dead files inside Attic subdir
#   0      Show the files which are inside the Attic subdir
hide_attic = 1

# log_sort: Sort order for CVS logs
#   date   Sort revisions by date
#   rev    Sort revision by revision number
#   cvs    Don't sort them. Same order as CVS/RCS shows them.
log_sort = date

# diff_format: Default diff format
#   h      Human readable
#   u      Unified diff
#   c      Context diff
#   s      Side by side
#   l      Long human readable (more context)
diff_format = h

# hide_cvsroot: Don't show the CVSROOT directory
#   1      Hide CVSROOT directory
#   0      Show CVSROOT directory
hide_cvsroot = 1

# set to 1 to make lines break at spaces,
# set to 0 to make no-break lines,
# set to a positive integer to make the lines cut at that length
hr_breakable = 1

# give out function names in human readable diffs
# this just makes sense if we have C-files, otherwise
# diff's heuristic doesn't work well ..
# ( '-p' option to diff)
hr_funout = 0

# ignore whitespaces for human readable diffs
# (indendation and stuff ..)
# ( '-w' option to diff)
hr_ignore_white = 1

# ignore diffs which are caused by
# keyword-substitution like $Id - Stuff
# ( '-kk' option to rcsdiff)
hr_ignore_keyword_subst = 1

# allow annotation of files.
allow_annotate = 1

# allow pretty-printed version of files
allow_markup = 1

# allow compression with gzip of output if the Browser accepts it
# (HTTP_ACCEPT_ENCODING=gzip)
# [make sure to have gzip in the path]
allow_compress = 1

# If you have files which automatically refers to other files
# (such as HTML) then this allows you to browse the checked
# out files as if outside CVS.
checkout_magic = 1

# Show last changelog message for sub directories
# The current implementation makes many assumptions and may show the
# incorrect file at some times. The main assumption is that the last
# modified file has the newest filedate. But some CVS operations
# touches the file without even when a new version is't checked in,
# and TAG based browsing essientially puts this out of order, unless
# the last checkin was on the same tag as you are viewing.
# Enable this if you like the feature, but don't rely on correct results.
show_subdir_lastmod = 0

# show a portion of the most recent log entry in directory listings
show_logs = 1

# Show CVS log when viewing file contents
show_log_in_markup = 1

# == Configuration defaults ==
# Defaults for configuration variables that shouldn't need
# to be configured..

#
# If you want to use Marc-Andrew Lemburg's py2html (and Just van Rossum's
# PyFontify) to colorize Python files, then you may need to change this
# variable to point to their directory location.
#
# This directory AND the standard Python path will be searched.
#
py2html_path = .
#py2html_path = /usr/local/lib/python1.5/site-python

# the length to which the most recent log entry should be truncated when
# shown in the directory view
short_log_len = 80

diff_font_face = Helvetica,Arial
diff_font_size = -1

# should we use 'enscript' for syntax coloring?
use_enscript = 1

#
# if the enscript program is not on the path, set this value
#
enscript_path = /home/.darling/rizwank/bin/
# enscript_path = /usr/bin/

#
# ViewCVS has its own set of mappings from filename extensions and filenames
# to languages. If the language is not supported by enscript, then it can
# be listed here to disable the use of enscript.
#
disable_enscript_lang =
# disable_enscript_lang = perl, cpp

#
# ViewCVS can generate tarball from a repository on the fly.
#
allow_tar = 1
# allow_tar = 1

#
# Use CvsGraph. See http://www.akhphd.au.dk/~bertho/cvsgraph/ for
# documentation and download. 
#
use_cvsgraph = 1
# use_cvsgraph = 1

#
# if the cvsgraph program is not on the path, set this value
#
cvsgraph_path = /home/rizwank/bin/
# cvsgraph_path = /usr/local/bin/

#
# Location of the customized cvsgraph configuration file.  
# You will need an absolute pathname here:
#
cvsgraph_conf = /home/rizwank/geekymedia.com/viewcvs/cvsgraph.conf

#
# Enable user selectable image generation.
# With this option, users will get a set of check-/radio-boxes under
# the graph, which can be used to alter the image's layout.
#
cvsgraph_useropt = 1

#
# Options for cvsgraph's default behavior which can be changed
# in the graph display. Set the options to a sum of the following
# flags:
#   1 - Show upside down
#   2 - Add a brachbox at the head of each trunk
#   4 - Strip all but first untagged revisions
#   8 - Strip all untagged revisions (implies previous)
#  16 - Draw the tree left-to-right or right-to-left
#  32 - Allow limit on max tags displayed (adds text-input)
# All other bits reserved for future use.
#
cvsgraph_opt = 12

#
# Set to enable regular expression search of all files in a directory
#
# WARNING:
#
#   Enabling this option can consume HUGE amounts of server time. A
#   "checkout" must be performed on *each* file in a directory, and
#   the result needs to be searched for a match against the regular
#   expression.
#
#
# SECURITY WARNING:  Denial Of Service
#
#   Since a user can enter the regular expression, it is possible for
#   them to enter an expression with many alternatives and a lot of
#   backtracking. Executing that search over thousands of lines over
#   dozens of files can easily tie up a server for a long period of
#   time.
#
# This option should only be used on sites with trusted users. It is
# highly inadvisable to use this on a public site.
#
use_re_search = 0
# use_re_search = 1

#---------------------------------------------------------------------------
[vhosts]
### DOC

# vhost1 = glob1, glob2
# vhost2 = glob3, glob4

# [vhost1-section]
# option = value
# [vhost1-othersection]
# option = value
# [vhost2-section]
# option = value

#
# Here is an example:
#
# [vhosts]
# lyra = *lyra.org
#
# [lyra-general]
# forbidden = hideme
#
# [lyra-options]
# show_logs = 0
#
# Note that "lyra" is the "canonical" name for all hosts in the lyra.org
# domain. This canonical name is then used within the additional, vhost-
# specific sections to override specific values in the common sections.
#

#---------------------------------------------------------------------------